BW88A

BW72A

BT32A

BT48A

BD4C

Alpine Efficiency’s Boot Bin Storage System is revolutionizing the way rental operations store and DRY their ski boots. This space efficient system eliminates the need for conventional trees or cumbersome storage shelves. The days of having to wrestle with plastic boot holders for rental boots is over.

For many operations boots pose more of a storage problem than skis. Clean up the look of your shop by streamlining your operation with Alpine Efficiency Boot Bins. All our Bins are available with or without air circulation; however, adding air circulation at a later date is not possible.     

As this is part of the normal storage system, there is NO additional handling required.

With our unique storage method, boots are placed upside down on rods shaped to fit any size boot cuff. It’s so simple, yet smart. Boots are accessed with ease and the design positions the boots for draining and drying. Any liquid drains out, and does not run into the boot underneath!

 Boot Bins for Storage Only
Model Cap. Depth Width Height 
BT-32 32pr. 3ft. 4ft. 6ft.
BT-48 48pr. 3ft. 4ft. 7ft.
BW-64  64pr.  4ft.   4ft. 6ft.
BW-72  72pr.  4ft.  4ft. 7ft.
BW-80 80pr. 4ft. 4ft. 7.5ft.
BW-88J 88pr. 4ft. 4ft. 7.5ft.

   

 Boot Bins for Storage and Drying
Model Cap. Depth Width Height 
BT-32A 32pr. 3ft. 4ft. 6ft.
BT-48A 48pr. 3ft. 4ft. 7ft.
BW-64A  64pr.  4ft.   4ft. 6ft.
BW-72A 72pr.  4ft.  4ft. 7ft.
BW-80A 80pr. 4ft. 4ft. 7.5ft.
BW-88JA 88pr. 4ft. 4ft. 7.5ft.

50% Deposit required with order

BW88JA 88 pr Junior boot drying storage rack
Our highest capacity boot dryer /storage system is strictly for junior boots, holding 88 pair of smaller boots in a space of 4ft.x4ft.

Along the same concept as our standard BW72A for adult boots, we can maximize the use of your expensive floor space! This monster even has 4 blowers to really move some air.

With junior after-school ski programs becoming more popular, this system addresses the major problem of keeping all those junior boots dry and organized. The two arms swing like a door, to enable access to the boots at the rear of the rack.

Junior skiers are our future customers, so keep them coming back to your shop by renting them dry boots. 

(At least, don’t chase them away with cold, wet boots!)

 

 
Here is a close up of the dual blowers, mounted in the top of each vertical tube.

The only maintenance required on all our blowers, is a few drops of light oil in each motor, once a year.

Dimensions: 48" wide 48" deep 90" high

Power : 115 volt ac. 500 watts

 

 

BW72A. 72 pr boot drying storage rack

BW72A showing hinged sides
BW72A. 72 pr boot drying storage rack BW72A showing hinged sides for easy boot access

 BW64A  Same as above, except 4 rows of boots on right

 

BT 32A       

 BT48A

BT 32A

BT48A

This Boot Taxi holds 32 pair of boots, ski, snowboard, X-C, etc.

Mounted on wheels, 2 fixed, 2 casters, it is easily moved about for access and compact storage. This is simply 1/2 of our 64 pr boot dryer, on wheels. (please note - the photo shows the hot air box from our heated models, currently unavailable. It ships with the air blower, below.

Dimensions 4ft wide, 2.5ft deep, 6ft high (approx.)

 

This Boot Taxi holds 48 pair of boots in a space of only 12 square feet. Mounted on wheels, it can be moved around for access and transportation, then plugged in for the night to dry the boots.

A blower is mounted at the top of each of the vertical columns to supply more than enough air for complete overnight drying. Both blowers are wired together, so each Taxi only needs one 115v. outlet.

As an option, this Boot Taxi can be mounted on rails to save even more space, similar to high-density storage in a library or file room.

Dimensions: 48"wide 32"deep 78"high

                                           

           

Close-up of Blower

Close up view of blower motor and boot support wires, common to most of our boot dryers. The blower circulates ambient air through the boot, providing a good clean overnight dry. This slow overnight drying cycle does not shrink or otherwise damage the boot liners, a common problem with heated systems.

Simply changing the air inside the boot every 20 sec. has boots bone-dry by morning.

 

  

BW 8 AO  8 pair add-on unit.
We have made yet another “add-on” kit so that your existing BW64A Boot Dryers can be upgraded to 72 pair. This piece simply plugs into the top of your rack, and the air automatically circulates from the existing blower!! Installation only takes about 10 minutes per rack. What could be easier!! 

Available only for BW64, BW64A models only.